Multi-year procurement planning
Biomass procurement is not a one-shot decision. Nearby clusters get harvested first; the radius has to expand over time as supply depletes. FRED's multi-year projections model this trajectory.
#What it does
A single-year siting query tells you the steady-state economics assuming an idealized supply environment. A multi-year projection models what actually happens over a facility's operating horizon: nearby clusters deplete, the operational radius grows, and per-year cost evolves accordingly.
For a 10-year procurement plan, FRED simulates each year sequentially. Year 1 uses the closest clusters; year 2 picks up wherever year 1 left off; by year 10 the radius has often grown substantially.
#How to ask
- "Project this over 10 years" (as a follow-up to a siting query)
- "Show me 15-year supply and cost for a 20MW facility near Quincy"
- "What does the cost curve look like over a decade in this location?"
- "How far does the radius grow by year 10?"
#The depletion model
FRED's depletion model is deterministic and follows a simple rule: each cluster, when harvested, contributes its fulltotal_biomass_bdt in that year and is then removed from the available pool. The next year, the procurement radius expands as needed to make up the lost supply.
Two design choices to be aware of:
- Full depletion per visit. The C-BREC dataset already encodes
total_biomass_bdtas the harvestable yield under prescription, accounting for what gets left on the landscape. So when FRED depletes a cluster fully, this represents one harvest treatment visit, not exhaustive stripping of all biomass. - Expanding ring search. Each year, FRED expands the search in 5km rings outward from the facility until demand is met. There is no hard radius cap; if year 10 needs a 75km radius, FRED reports that and you can decide if it remains economic.
#Reading the trajectory
The multi-year output has three views:
- Year-by-year cost: per-BDT LCOE for each year of the horizon. Usually rises modestly over time as the radius grows.
- Year-by-year radius: the operational radius needed each year. The growth rate is informative; a radius that doubles by year 10 indicates supply scarcity, while one that grows by 30 percent indicates comfortable supply.
- Cumulative cluster count: how many distinct clusters have been visited by each year. Tells you how reliant the plan is on continued cluster availability.
#The sawtooth pattern
Year-by-year cost charts often show a noticeable sawtooth: a year of lower cost followed by a year of higher cost, then back down. This is a real signal, not a numerical artifact.
The pattern reflects genuine terrain heterogeneity. After a year that depleted easier flat-terrain clusters, the remaining clusters within reach may be on steeper or more remote ground. The next year's cost reflects this; the year after, the radius expands far enough to pick up easier clusters again.
For planning purposes, the 10-year average is usually the right number to compare across candidate sites. The sawtooth tells you about year-over-year cash flow variability, which matters for contract structuring but not for site selection.
#Caveats
- Prescription continuity. The depletion model assumes prescriptions stay constant. Real procurement plans sometimes shift treatments based on landowner agreements, ecological conditions, or policy changes. Year-10 numbers should be treated as a trajectory, not a commitment.
- Forest regrowth is not modeled within horizon. Cluster regrowth on a 30-50 year cycle exceeds typical facility planning horizons, so FRED does not return clusters to the pool after depletion within the projection window.
- Inflation and market dynamics excluded. Costs are in real (constant) dollars. Diesel prices, labor costs, and chip market prices change over a decade; FRED's model is engineering cost only.
- Competition with adjacent facilities not modeled. If a competitor sites near your facility mid-horizon, the available supply shrinks. FRED's single-facility projection does not anticipate this.