Supply: BDT/year
What FRED's supply numbers represent, how to convert between facility capacity and biomass demand, and how depletion changes the picture over time.
#What BDT/year means
FRED reports biomass supply in bone dry tons per year (BDT/year). The "bone dry" part matters: this is biomass at zero moisture content. Green tons (wet weight) are roughly 1.5x to 2x larger numerically.
When FRED says a region offers 42,300 BDT/year, that is the sustainable annual yield available to procurement, summed across all qualifying clusters in the region.
#Sustainable annual yield
FRED's supply is sustainable annual yield, not inventory. The distinction is important. If FRED reports 42,000 BDT/year of supply within a procurement radius, it means you can harvest that amount year after year under the assigned prescriptions without depleting the long-term resource.
However, this rests on two underlying assumptions:
- Prescriptions are followed. The C-BREC prescriptions specify thinning levels and rotation cycles. If treatments are heavier or more frequent than prescribed, the sustainable yield is lower.
- Forest growth meets historical projections. The underlying growth assumptions in C-BREC reflect long-run trends. Severe drought or fire events can disrupt this.
#Where the supply comes from
FRED's supply numbers aggregate across individual clusters. A cluster is a polygon over a small contiguous forest area, typically 20 to 200 acres, with a specific prescription assigned. Each cluster contributes its harvestable yield (thetotal_biomass_bdt column in the underlying dataset).
The cluster-level granularity matters when supply is spatially concentrated. A region with 1,200 small clusters spread evenly across terrain is operationally different from one with 200 large clusters concentrated in a few areas. FRED's response will note cluster count and average cluster size; pay attention to both, not just the total.
#How depletion works
For multi-year projections, FRED models cluster depletion explicitly. Each cluster, when harvested, contributes its fulltotal_biomass_bdt to that year's supply, then is removed from the available pool. Thetotal_biomass_bdt value is already the harvestable yield under prescription, so depleting a cluster represents one full treatment visit rather than exhaustive stripping.
Regrowth happens on much longer timescales (decades) than typical facility planning horizons (10-20 years), so FRED does not return clusters to the available pool within projection windows.
#Converting MW to BDT/year
Facility capacity is typically stated in MW; biomass demand is in BDT/year. The conversion depends on the technology type and operating efficiency. Approximate conversions for standard California biomass technologies:
- Generating Plant (GP): roughly 1,800-2,200 BDT/MW/year at typical capacity factors.
- Generating Plant Oversized (GPO): roughly 1,600-1,900 BDT/MW/year.
- Combined Heat and Power (CHP): lower per-MW demand for electricity-equivalent output because heat recovery improves overall efficiency.
Worked example: a 20MW GP facility at 2,000 BDT/MW/year requires 40,000 BDT/year of biomass demand. FRED will size the procurement radius to meet roughly that target. If you specify capacity in MW, FRED applies the appropriate conversion automatically. If you prefer to control the math, specify BDT/year directly.